We use cookies to try and give you a better experience in Freshdesk.
You can learn more about what kind of cookies we use, why, and how from our Privacy policy. If you hate cookies, or are just on a diet, you can disable them altogether too. Just note that the Freshdesk service is pretty big on some cookies (we love the choco-chip ones), and some portions of Freshdesk may not work properly if you disable cookies.
We’ll also assume you agree to the way we use cookies and are ok with it as described in our Privacy policy, unless you choose to disable them altogether through your browser.
No.
Code
Description
Register Date
Status
Mitigation
Measurement Notes
1
UI_20221005_1
Hydrodynamic parameters used for wave load cases are constant on one beam element.
This may lead to mismatched results compared to other software. This especially happens for beam elements near sea water level.
Measurement is under process.
October 5, 2022
Resolved
Split beams at sea water level, table's elevations.
Version 2023.04
The software can now detect changes in marine growth distribution within one beam element. This affects all wave-related loads (dead load, buoyancy, etc.).
2
UI_20221005_2
Users cannot define fatigue parameters for hotspot locations on solid components.
October 5, 2022
Resolved
None
Version 2023.04
Design fatigue factor (DFF), SN curve can be defined for each hotspot of fatigue components.
3
UI_20221005_3
Fatigue result visualization for solid components is not yet supported.
October 5, 2022
Resolved
None
Version 2023.04
Fatigue damage results on solid elements can be displayed as like hotspots on shell elements.
4
UI_20220603_1
UI features to build beam systems (jackets) from scratch are limited.
There should be a feature to import beam systems from other formats' basic UI to create/modify and delete beam elements.
June 3, 2022
Acknowledged
None
5
UI_20220603_2
UI features to modify the beam system are limited.
The following features should be improved:
- Assigning/modifying beam cross-section to beam elements
- Splitting/merging beam elements
- Creating/assigning/modifying hydrodynamic table to beam elements
- Beam/node selection
June 3, 2022
Working on measurement
6
UI_20220603_3
Selecting property on the left panel should highlight related beam elements on the graphic window.
June 3, 2022
Acknowledged
None
7
UI_20220603_4
The font size is small.
Widget sizes are not dynamically scaled.
June 3, 2022
Acknowledged
None
8
UI_20220603_5
Creating offset at 1D beam joint features.
A UI to create offsets for braces at joints. Users can modify gaps between braces.
June 3, 2022
Working on measurement
None
Version 2023.04
Users can now create rigid connectors with the same axis as parent beam elements. The rigid length is computed automatically based on a cross-section of the chord/leg (using outer diameter).
More configuration options are in progress.
9
UI_20220603_6
Load case creation workflow is complicated
There are several steps to create simple load cases via UI. This can be troublesome.
June 3, 2022
Working on measurement
None
10
UI_20220603_7
Configuration for pushover analysis is complicated
June 3, 2022
Acknowledged
None
11
UI_20220603_8
Define load combination in load combination
June 3, 2022
Working on measurement
None
12
UI_20220603_9
Visualization of node/boundary ports/constraints in a more convenient way. I.e., different symbols for fully fixed, partial fixed, pin boundary conditions.
June 3, 2022
Acknowledged
None
13
UI_20240313_1
Mapping function is not fully supported in terms on UI and solver functionalities
March 13, 2023
Acknowledged
None
14
UI_20240320_1
Moving and rotating 2 components in sequence but the effect is applied for both components
March 20, 2023
Working on measurement
Save the model and restart Akselos Modeler.
15
UI_20240424_1
"Load More" feature takes much time on some particular models (e.g. Coker)
April 24, 2023
Acknowledged
None
16
UI_20230926_1
Token Framework Rev2, which can be applied to some customers since September 2023, has the following limitations:
Users cannot check the remaining tokens of the organization
Users can only see token usage due to solving jobs
September 26, 2023
Working on measurement
Akselos Support can help by providing the remaining tokens
Target release Version 2023.11
17
UI_20230926_2
Some parameters of Drag load cases (Morison loads), such as current_depth, current_velocity, etc., cannot be edited using UI.
September 26, 2023
Working on measurement
Modify the information with AKS JSON format manually.
Target release Version 2023.11
Last updated: August 2023
0 Votes
0 Comments
Login or Sign up to post a comment